Monel 400 (Alloy 400 - UNS N04400)
Common Trade Names :
Monel 400®, Nickelvac® 400, Nicorros® 400
Monel 400 is a combination of nickel and copper and is hardened by cold working only. This alloy is widely renowned for for its corrosion resistant properties against flowing sea - water and is extensively used for marine applications. Monel is also extremely resistant to stress corrosion cracking in most freshwaters. High temperature ( up to 1000 °F) has no effect on this alloy and it also has excellent mechanical properties at subzero temperatures.
Monel 400 is available in many forms like wire, round bar, Forged bar, hex bar, Flat bar, Circles, Ring, Tube, seamless Pipe, Welded / ERW Pipe, Sheet, Plate, Coil, Flanges, fasteners, Socket weld Fittings, ferrule fittings, Buttweld fittings Like cap, elbow, tee. UNS N04400 is available in various forms like Monel 400 wire, Monel 400 Round bar, Monel 400 Forged bar, Monel 400 hex bar, Monel 400 Flat bar, Monel 400 Circles, Monel 400 Ring, Monel 400 Tube, Monel 400 seamless Pipe, Monel 400 Welded / ERW Pipe, Monel 400 Sheet, Monel 400 Plate, Monel 400 Coil, Monel 400 Flanges, Monel 400 fasteners, Monel 400 Socket weld Fittings, Monel 400 ferrule fittings, Monel 400 Buttweld fittings Like cap, elbow, tee, reducer.
UNS N04400 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.
Chemical Analysis of ALLOY 400 (UNS N04400)
Monel 400®, Nickelvac® 400, Nicorros® 400
C
|
Mn
|
S
|
Si
|
Ni |
Cu |
Al
|
Fe
|
0.25 Max
|
1.5 Max
|
0.01 Max
|
0.5 Max
|
63.0 Min |
27.0 - 33.0 |
2.30 - 3.15
|
2.5 Max
|
Specifications
| Monel 400 Sheet / Plate | Monel 400 Round Bar | Monel 400 Pipe | Monel 400Tube | Monel 400 Fittings | Monel 400 Forgings |
| QQ N 286 | ASME SB-865 AMS 4676 QQ N 286 |
QQ N 286 AMS 4676 |
Monel K500® - UNS N05500
Common Trade Name :
Monel K-500® is a nickel-copper alloy with the same corrosion resistance and characteristics as the Monel 400®. The Monel K-500® has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments.Monel K-500 is available in various forms are Bars, Forge Bar, Fasteners and Forge Fittings. Chemical Analysis of Monel K500® (UNS N05500)
Monel K500 is an age-hardened version of Monel 400, that means it has higher strength and resistance to corrosives, especially seawater. Wide range of alloy K-500 is available in various forms like Bars, Forge Bar, Fasteners and Forge Fittings.
UNS N05500 is available in various forms like Bars, Forge Bar, Fasteners and Forge Fittings.
Chemical Analysis of ALLOY K500 (UNS N05500)
Monel K500®, Nickelvac® K500, Nicorros® K500
C
|
Mn
|
S
|
Si
|
Ni |
Cu |
Al
|
Fe
|
0.3 Max
|
2.0 Max
|
0.024 Max
|
0.5 Max
|
63.0 Max |
27.0 - 33.0 |
2.3 - 3.15
|
2.0 Max
|
Specifications
| Monel K500 Sheet / Plate | Monel K500 Round Bar | Monel K500 Pipe | Monel K500 Tube | Monel K500 Fittings | Monel K500 Forgings |
| QQ N 286 | ASME SB-865 AMS 4676 QQN 286 |
ASME SB-564 |
Trademark Notice : Some names are trade names and /or trademarks of specific manufacturers. Reliable Steel Distributors. is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s).
Names are listed solely for reference to help identify products consistent with listed specifications.
| ALLOY 400 Reducers | ALLOY 400 Concentric Reducers | ALLOY 400 Tees |
| ALLOY 400 Pipe Nipples | ALLOY 400 Stub end | ALLOY 400 Tees |
| ALLOY 400 Elbows | ALLOY 400 3D Elbow | ALLOY 400 Stub Ends |
| ALLOY 400 End Caps | ALLOY 400 5D Elbow | ALLOY 400 180° SR Return Bends |
| ALLOY 400 Long Radius Elbow | ALLOY 400 Eccentric Reducers | ALLOY 400 Reducing Crosses |
| ALLOY 400 Elbows | ALLOY 400 Crosses | ALLOY 400 Couplings |
| ALLOY 400 Short Radius Elbow | ALLOY 400 Pipe Bends | ALLOY 400 45° Elbows |
| ALLOY 400 Reducing Elbow | ALLOY 400 Piggable Bends | ALLOY 400 180° LR Return Bends |
| ALLOY 400 Forged Caps | ALLOY 400 Forged Tees | ALLOY 400 Unions |
| ALLOY 400 Couplings | ALLOY 400 Forged Reducers | ALLOY 400 Forged Crosses |
| ALLOY 400 90° Forged Elbows | ALLOY 400 Inserts | ALLOY 400 Forged Plug |
| ALLOY 400 45° Forged Elbows | ALLOY 400 Street Elbows | ALLOY 400 Bushings |
| ALLOY 400 Forged Fittings | ALLOY 400 Fittings | ALLOY 400 Socket weld Fitting |
| ALLOY 400 Forged Fittings | ALLOY 400 Fittings | ALLOY 400 Threaded Fitting |
| ALLOY 400 Forged Fittings | ALLOY 400 Forged Pipe Fittings | ALLOY 400 Forged Pipe Fittings |
| ALLOY 400 Blind Flanges | ALLOY 400 Plate Flanges | ALLOY 400 ASME Flanges |
| ALLOY 400 Reducing Flanges | ALLOY 400 Weld Neck Flanges | ALLOY 400 Industrial Flanges |
| ALLOY 400 Threaded Flanges | ALLOY 400 Lap Joint Flanges | ALLOY 400 Long weld Neck Flanges |
| ALLOY 400 Slip-On Flanges | ALLOY 400 Socket Weld Flanges | ALLOY 400 Orifice Flanges |
| ALLOY 400 Flat Flanges | ALLOY 400 DIN Flanges | ALLOY 400 ANSI Flanges |
| ALLOY 400 Pipe Flanges | ALLOY 400 Flanges | ALLOY 400 Forged Flanges |
| Monel 400 Reducers | Monel 400 Concentric Reducers | Monel 400 Tees |
| Monel 400 Pipe Nipples | Monel 400 Stub end | Monel 400 Tees |
| Monel 400 Elbows | Monel 400 3D Elbow | Monel 400 Stub Ends |
| Monel 400 End Caps | Monel 400 5D Elbow | Monel 400 180° SR Return Bends |
| Monel 400 Long Radius Elbow | Monel 400 Eccentric Reducers | Monel 400 Reducing Crosses |
| Monel 400 Elbows | Monel 400 Crosses | Monel 400 Couplings |
| Monel 400 Short Radius Elbow | Monel 400 Pipe Bends | Monel 400 45° Elbows |
| Monel 400 Reducing Elbow | Monel 400 Piggable Bends | Monel 400 180° LR Return Bends |
| Monel 400 Forged Caps | Monel 400 Forged Tees | Monel 400 Unions |
| Monel 400 Couplings | Monel 400 Forged Reducers | Monel 400 Forged Crosses |
| Monel 400 90° Forged Elbows | Monel 400 Inserts | Monel 400 Forged Plug |
| Monel 400 45° Forged Elbows | Monel 400 Street Elbows | Monel 400 Bushings |
| Monel 400 Forged Fittings | Monel 400 Fittings | Monel 400 Socket weld Fitting |
| Monel 400 Forged Fittings | Monel 400 Fittings | Monel 400 Threaded Fitting |
| Monel 400 Forged Fittings | Monel 400 Forged Pipe Fittings | Monel 400 Forged Pipe Fittings |
| Monel 400 Blind Flanges | Monel 400 Plate Flanges | Monel 400 ASME Flanges |
| Monel 400 Reducing Flanges | Monel 400 Weld Neck Flanges | Monel 400 Industrial Flanges |
| Monel 400 Threaded Flanges | Monel 400 Lap Joint Flanges | Monel 400 Long weld Neck Flanges |
| Monel 400 Slip-On Flanges | Monel 400 Socket Weld Flanges | Monel 400 Orifice Flanges |
| Monel 400 Flat Flanges | Monel 400 DIN Flanges | Monel 400 ANSI Flanges |
| Monel 400 Pipe Flanges | Monel 400 Flanges | Monel 400 Forged Flanges |
| UNS N04400 Reducers | UNS N04400 Concentric Reducers | UNS N04400 Tees |
| UNS N04400 Pipe Nipples | UNS N04400 Stub end | UNS N04400 Tees |
| UNS N04400 Elbows | UNS N04400 3D Elbow | UNS N04400 Stub Ends |
| UNS N04400 End Caps | UNS N04400 5D Elbow | UNS N04400 180° SR Return Bends |
| UNS N04400 Long Radius Elbow | UNS N04400 Eccentric Reducers | UNS N04400 Reducing Crosses |
| UNS N04400 Elbows | UNS N04400 Crosses | UNS N04400 Couplings |
| UNS N04400 Short Radius Elbow | UNS N04400 Pipe Bends | UNS N04400 45° Elbows |
| UNS N04400 Reducing Elbow | UNS N04400 Piggable Bends | UNS N04400 180° LR Return Bends |
| UNS N04400 Forged Caps | UNS N04400 Forged Tees | UNS N04400 Unions |
| UNS N04400 Couplings | UNS N04400 Forged Reducers | UNS N04400 Forged Crosses |
| UNS N04400 90° Forged Elbows | UNS N04400 Inserts | UNS N04400 Forged Plug |
| UNS N04400 45° Forged Elbows | UNS N04400 Street Elbows | UNS N04400 Bushings |
| UNS N04400 Forged Fittings | UNS N04400 Fittings | UNS N04400 Socket weld Fitting |
| UNS N04400 Forged Fittings | UNS N04400 Fittings | UNS N04400 Threaded Fitting |
| UNS N04400 Forged Fittings | UNS N04400 Forged Pipe Fittings | UNS N04400 Forged Pipe Fittings |
| UNS N04400 Blind Flanges | UNS N04400 Plate Flanges | UNS N04400 ASME Flanges |
| UNS N04400 Reducing Flanges | UNS N04400 Weld Neck Flanges | UNS N04400 Industrial Flanges |
| UNS N04400 Threaded Flanges | UNS N04400 Lap Joint Flanges | UNS N04400 Long weld Neck Flanges |
| UNS N04400 Slip-On Flanges | UNS N04400 Socket Weld Flanges | UNS N04400 Orifice Flanges |
| UNS N04400 Flat Flanges | UNS N04400 DIN Flanges | UNS N04400 ANSI Flanges |
| UNS N04400 Pipe Flanges | UNS N04400 Flanges | UNS N04400 Forged Flanges |
| UNS N05500 Reducers | UNS N05500 Concentric Reducers | UNS N05500 Tees |
| UNS N05500 Pipe Nipples | UNS N05500 Stub end | UNS N05500 Tees |
| UNS N05500 Elbows | UNS N05500 3D Elbow | UNS N05500 Stub Ends |
| UNS N05500 End Caps | UNS N05500 5D Elbow | UNS N05500 180° SR Return Bends |
| UNS N05500 Long Radius Elbow | UNS N05500 Eccentric Reducers | UNS N05500 Reducing Crosses |
| UNS N05500 Elbows | UNS N05500 Crosses | UNS N05500 Couplings |
| UNS N05500 Short Radius Elbow | UNS N05500 Pipe Bends | UNS N05500 45° Elbows |
| UNS N05500 Reducing Elbow | UNS N05500 Piggable Bends | UNS N05500 180° LR Return Bends |
| UNS N05500 Forged Caps | UNS N05500 Forged Tees | UNS N05500 Unions |
| UNS N05500 Couplings | UNS N05500 Forged Reducers | UNS N05500 Forged Crosses |
| UNS N05500 90° Forged Elbows | UNS N05500 Inserts | UNS N05500 Forged Plug |
| UNS N05500 45° Forged Elbows | UNS N05500 Street Elbows | UNS N05500 Bushings |
| UNS N05500 Forged Fittings | UNS N05500 Fittings | UNS N05500 Socket weld Fitting |
| UNS N05500 Forged Fittings | UNS N05500 Fittings | UNS N05500 Threaded Fitting |
| UNS N05500 Forged Fittings | UNS N05500 Forged Pipe Fittings | UNS N05500 Forged Pipe Fittings |
| UNS N05500 Blind Flanges | UNS N05500 Plate Flanges | UNS N05500 ASME Flanges |
| UNS N05500 Reducing Flanges | UNS N05500 Weld Neck Flanges | UNS N05500 Industrial Flanges |
| UNS N05500 Threaded Flanges | UNS N05500 Lap Joint Flanges | UNS N05500 Long weld Neck Flanges |
| UNS N05500 Slip-On Flanges | UNS N05500 Socket Weld Flanges | UNS N05500 Orifice Flanges |
| UNS N05500 Flat Flanges | UNS N05500 DIN Flanges | UNS N05500 ANSI Flanges |
| UNS N05500 Pipe Flanges | UNS N05500 Flanges | UNS N05500 Forged Flanges |
| Monel k500 Reducers | Monel k500 Concentric Reducers | Monel k500 Tees |
| Monel k500 Pipe Nipples | Monel k500 Stub end | Monel k500 Tees |
| Monel k500 Elbows | Monel k500 3D Elbow | Monel k500 Stub Ends |
| Monel k500 End Caps | Monel k500 5D Elbow | Monel k500 180° SR Return Bends |
| Monel k500 Long Radius Elbow | Monel k500 Eccentric Reducers | Monel k500 Reducing Crosses |
| Monel k500 Elbows | Monel k500 Crosses | Monel k500 Couplings |
| Monel k500 Short Radius Elbow | Monel k500 Pipe Bends | Monel k500 45° Elbows |
| Monel k500 Reducing Elbow | Monel k500 Piggable Bends | Monel k500 180° LR Return Bends |
| Monel k500 Forged Caps | Monel k500 Forged Tees | Monel k500 Unions |
| Monel k500 Couplings | Monel k500 Forged Reducers | Monel k500 Forged Crosses |
| Monel k500 90° Forged Elbows | Monel k500 Inserts | Monel k500 Forged Plug |
| Monel k500 45° Forged Elbows | Monel k500 Street Elbows | Monel k500 Bushings |
| Monel k500 Forged Fittings | Monel k500 Fittings | Monel k500 Socket weld Fitting |
| Monel k500 Forged Fittings | Monel k500 Fittings | Monel k500 Threaded Fitting |
| Monel k500 Forged Fittings | Monel k500 Forged Pipe Fittings | Monel k500 Forged Pipe Fittings |
| Monel k500 Blind Flanges | Monel k500 Plate Flanges | Monel k500 ASME Flanges |
| Monel k500 Reducing Flanges | Monel k500 Weld Neck Flanges | Monel k500 Industrial Flanges |
| Monel k500 Threaded Flanges | Monel k500 Lap Joint Flanges | Monel k500 Long weld Neck Flanges |
| Monel k500 Slip-On Flanges | Monel k500 Socket Weld Flanges | Monel k500 Orifice Flanges |
| Monel k500 Flat Flanges | Monel k500 DIN Flanges | Monel k500 ANSI Flanges |
| Monel k500 Pipe Flanges | Monel k500 Flanges | Monel k500 Forged Flanges |
| 25 NiCrMo 4 | 25-17-4Mn | 25-20 |
| 25-20Si | 25-21L | 25-32-3 |
| 25-4-4 | 25-5-1L | 25-50-6 |
| 25-7-3 | 25-7-4 | 25-9-4 L |
| 25-PV | 25.10.4.L | 25.20.5.LCu |
| 25.20.B | 25.20.C | 25.20.HC |
| 25.20.L | 25.22.2 | 25.22.2.LMn |
| 25.22.2.LMnB | 25.7.4.L | 25/20 |
| 25/25 Ti | 250 | 250 A 58 |
| 250 A 61 | 250-100 TF183 | 250-35-A5 |
| 2506 | 2507 | 250Ch25V3TL |
| 250L0 | 250L15 | 250N |
| 251 | 251 A 58 | 251 A 60 |
| 251 H 60 | 2510 | 2511 |
| 2512 | 2515 | 2516.0 BOHLER K 405 |
| 2517 | 2519 | 252 M |
| 2523 | 253 | 253 MA |
| 253MA | 254 EM | 254 SLX |
| 254 SMO | 254 SMO R | 2541 |
| 2542 | 2542.0 BOHLER K 450 | 255 |
| 2550 | 2562 | 2562.0 BOHLER G |
| 2564 | 2567 | 2570 |
| 2581 | 2584 | 25A |
| 25C12S14 | 25C4 | 25C4 P25 |
| 25C4 P35 | 25C4 P50 | 25C4 P70 |
| 25C8 | 25C8 P25 | 25C8 P35 |
| 25C8 P50 | 25C8 P70 | 25Ch12N2V2M2F |
| 25Ch13G20AF1 | 25Ch13N2 | 25Ch13N2VMF |
| 25Ch15KJuBF | 25Ch17N2 | 25Ch18N8V2 |
| 25Ch18N9S2 | 25Ch1M1F | 25Ch1M1FA |
| 25Ch1M1FA-Sh | 25Ch1M1FA-VD | 25Ch1MF |
| 25Ch20N9V2M | 25Ch2G2FL | 25Ch2GNMFL |
| 25Ch2GNTA | 25Ch2GNTA-VD | 25Ch2M1F |
| 25Ch2MF | 25Ch2N4MA | 25Ch2N4MA-Sh |
| 25Ch2N4MFA | 25Ch2N4MFA-Sh | 25Ch2N4MFA-VD |
| 25Ch2N4MSTsA | 25Ch2N4VA | 25Ch2N4VA-Sh |
| 25Ch2NMFA | 25Ch2NML | 25Ch2NMTsRA |
| 25Ch5MA | 25ChGF | 25ChGFA |
| 25ChGL | 25ChGM | 25ChGM-PV |
| 25ChGM-Sh | 25ChGMA | 25ChGNMA |
| 25ChGNMT | 25ChGNMT-Sh | 25ChGNMTA |
| 25ChGSA | 25ChGSA-Sh | 25ChGT |
| 25ChGT-PV | 25ChGT-Sh | 25ChGTA |
| 25ChMFA | 25ChML | 25ChN3MFA |
| 25ChSNVFA | 25Cr13Mo6 | 25Cr13Mo6 A |
| 25Cr2Mo1VA | 25Cr2MoVA | 25Cr2MoVH |
| 25Cr2Ni4WA | 25Cr3Mo55 | 25CrMnSi |
| 25CrMnSiA | 25CrMo1VA | 25CrMo4 |
| 25CrMo4E | 25CrMo4KD | 25CrMoS4 |
| 25CrMoVA | 25G | 25G-Sh |
| 25G2 | 25G2F | 25G2NbY |
| 25G2S | 25G2Y | 25GA |
| 25GNb | 25GNbV | 25GS2 |
| 25GSL | 25GST | 25GV |
| 25H2N4WA | 25H3M | 25HGNMA |
| 25HGS | 25HM | 25HMA |
| 25KF14N | 25KFN14 | 25L |
| 25LAA | 25LI | 25LII |
| 25Mn | 25Mn1S14 | 25Mn4 |
| 25MnG | 25MnSi | 25MnTiBRE |
| 25N10GChTJu | 25Ni-20Cr-6Mo | 25NJu |
| 25NL | 25ps | 25R |
| 25S1C1 B | 25S2R | 25SiMn2MoV |
| 25T10P T | 25Z | 26 |
| 26 C | 26 CrMo 4 | 26 CrMo 4 S |
| 26 CrMo 7 | 26 Mn 5 | 26 MnCr 4-3 |
| 26 MnCr 6-3 | 26 MnMoB 6-4 | 26 MnSi 17 |
| 26 MoCr 11 | 26 MoCr 11 S | 26 MoCr 11 X |
| 26 MoCr 11 XS | 26 NiCr 6 4 | 26 NiCrMo 14-5 |
| 26 NiCrMo 14-6 | 26 NiCrMoV 11-5 | 26 NiCrMoV 14-5 |
| 26 NiCrMoV 5 | 26 NiCrMoV 8-5 | 26 NiMoV 14-4 |
| 26-1 | 26-3 Mo | 26-3-3 |
| 26/5 Mo | 260 | 260 W |
| 260 WT | 2601 | 2603 |
| 2606 | 260Y | 261 |
| 2614 | 2615 | 2622 |
| 2624 | 2625 | 2631 |
| 2632 | 2634 | 2642 |
| 2644 | 265 | 2652 |
| 2654 | 265D | 2662 |
| 2664 | 2678 | 26A |
| 26C B | 26C10BT | 26Ch14N2 |
| 26Ch15KMJu | 26Ch15KMT | 26ChG2MF |
| 26ChMA | 26ChN3M2FA | 26Cr4Mo2 |
| 26CrMo4 | 26CrMo4-2 | 26G2S |
| 26G2STA | 26H2MF | 26Mn5 |
| 26Mo1 | 26Mo2 | 26NiCrS4 |
| 26rs | 26S2 | 27 CrMoV 6-12 |
| 27 G 051 | 27 H 074 | 27 MnB 4 |
| 27 MnB 5 | 27 MnCr 4-3 | 27 MnCrB 5-2 |
| 27 MnCrV 4 | 27 MnMo 3-3 | 27 MnSi 5 |
| 27 MnSiVS 6 | 27 P 066 | 27 Q 057 |
| 27-31-4 | 27.31.4.LCu | 27.31.4.LCuR |
| 27.31.4S91 | 270 | 270-35-A5 |
| 270-480 | 270-480 W | 270-480W |
| 270-50-A5 | 2705 Superduplex | 2709.0 BOHLER W 722 |
| We Export | ||||
| Eastern Europe | Asia | North America | Western Europe | Middle East Africa |
| Austral asia | Central South | UAE | America | Portugal |
| Spain | Indonesia | Italy | Angola | Poland |
| Brazil | Sri Lanka | Russia | Chile | Singapore |
| Oman | Venezuela | Costa Rica | USA | Qatar |
| Thailand | Canada | Saudi Arabia | Bahrain | Egypt |
| Malaysia | Turkey | Mexico | Chine | Peru |
| United States | Nigeria | Jordan | Kuwait | Dubai |
| Bangkok | Iran | Germany | UK | New Zealand |
| Vietnam | South Africa | Kazakhstan | ||
